Samsung Galaxy Tab 2 7.0 Android tablet can now be updated with the latest version of KitKat 4.4.2 firmware with the help of Cyanogen Mod 11. Unfortunately, Samsung won’t be coming with the latest version of Kitkat for the device officially and so this custom ROM firmware is the best option to upgrade the device. This device comes with all the latest apps which are otherwise available in the OS version. After checking out the detailed list of quick list of pre requisites below, let’s proceed to the detailed procedure which will help you to update the device.Quick Pre Requisites:. First and the foremost thing you need to make sure is the Battery, it should be above 50%. Also, make sure that the USB Debugging is enabled from the path “Settings Applications Development USB debugging”, enable the USB Debugging in your device.
Update Galaxy Tab 2 7.0 To Kitkat Windows 10
Make sure that the Galaxy Tab 2 device is rooted or not which can be checked with the help of ROM Manager app. ROM Manager app can be installed from the Google PLAY Store.
The Samsung Galaxy Tab 3 7.0 was launched back in July 2013 with Android 4.1.2 Jelly Bean firmware running out of the box. Sadly, the device did not receive any major OS upgrade since its release but Samsung now seems to have blessed it with the latest firmware update. Download the Android 4.4.2 KitKat Firmware for Galaxy Tab 3 7.0 and flash it with Odin.If you remember, the 3G+WiFi version of the Galaxy Tab 3 7.0 (SM-T211) received the a couple of months ago and now Samsung has started rolling out the Android 4.4.2 KitKat update for Galaxy Tab 3 7.0 SM-T210 WiFi only version. The Galaxy Tab 3 7.0 features a 7-inch display with 600 x 1024 pixels resolution, Dual-core 1.2 GHz CPU, 1GB RAM, 3.15MP rear and 1.3MP rear camera, and 4000mAh battery.If you own this Tab and want to update it to the latest OS version, the wait is over now. Android 4.4.2 KitKat firmware with build version T210XXBNH4 for the Galaxy Tab 3 7.0 SM-T210 is now available for download. The first KitKat firmware is meant for the users of the device in Italy. The good thing is that the released firmware is unbranded and therefore it can be installed on any Galaxy Tab 3 7.0 SM-T210 (WiFi) that is not carrier branded.It simply means that you do not need to wait for the KitKat OTA to reach your country or reason.
You can simply download the Android 4.4.2 KitKat firmware from below and install it manually using Odin flash tool. Below, you’ll find the detailed steps to install the official firmware easily and safely. Contents.Features and ChangesSince KitKat is a major software update, you’ll notice various new features and improvements in your Tab’s performance.
Here’re some of the salient features:. Transparent status bar with white icons. New notification panel with expandable notifications. New camera shortcut on the lock screen. Option to choose default apps for messaging, home launcher and others.
The screen now turns off with fading effect. GPS toggle has been replaced with a Location toggle. Samsung clock app has a new Desk Clock tab. Samsung KNOX security. Google Now experience. TRIM.
Faster performance. Better battery life. Many othersScreenshots.
Note: You can download the official Samsung firmware using.Italy:India:Spain:Australia:Russia:South Africa:Egypt:United Kingdom:Israel:Brazil:Argentina:Germany:New Zealand: Preparation:. Download Odin 3.09:. Download and install.
Enable on your Tab 3. Charge you Tab to have at least 60% battery. Backup your important data and apps.Steps to Install. Extract the firmware zip file. Open the Odin folder and launch the program.
Boot your tab into the Download mode. If you do not know how to do so, here’s the method: turn off your Tab and then press and hold the Volume Down + Home + Power buttons together for about 2-3 seconds. You’ll see a warning screen, just press the Volume Up key to enter Download mode. Connect your Tab to your computer using the USB cable. To indicate a successful connection, the ID:COM port on Odin turns blue and “Added!” in the message box below.
Now click the AP button on Odin and select the firmware file with.tar.md5 extension. Make sure that only Auto Reboot and F. Reset Time options are checked on Odin. Take a calm breath and click the Start button on Odin.
Wait till the installation finished and you see PASS! Message on Odin. It might take about 2-4 minutes and your Galaxy Tab 3 will reboot automatically.When your device boots up, go to Settings About device to check the firmware version.
It should show Android version as 4.4.2. RecommendedShould you encounter or notice any issues (like overheating, battery drain, slow performance, WiFi connection, etc.) after updating your Galaxy Tab 3 to Android 4.4.2 KitKat, try the following solution. Bro please help me and please reply ok there we go i have a rooted smt210 and i have installed a custom rom on it which is good but not good for gaming and it is also slow so i just wanted to go back to the official firmware but the problem is that i got very slow internet and which can not download without any pause so please make a userscloud link for pakistan or uk firmware please i will we very thankfull please reply me with userscloud link ok.and also tell me can i flash it with twrp recovery if no no problem but please make userscloud links.thanks. Hello, excuse me, I’m from Mexico and I didn’t take note of my storage firmware, but I remember a year ago I successfully rooted my tab and as a result I got a T210XXAMG2 firmware.
I just unrooted it hopping I’d receive the automatic update for Kitkat but it says there’s a problem with my connection so that means I’m only left with manual update using Odin. Now, My question is, after unrooting I got this built number JZZ054K.T210XXAMG2 but still I saw that Mexico’s update had this one: TCE-T210XXBNI1 so now I’m confused. Which one should I use? I already downloaded Mexico’s file but when trying to unzip it it says the file’s damaged and won’t let me even unzip the file, so what now? Any suggestions? Hello, I’m from Israel and the tutorial worked just fine, thank you very much!About a year ago I had an issue in which I couldn’t copy files that are over 4GB to the tablet,I found a guide with a solution using rooting, then failed the rooting process and almost lost my tablet (got stuck with a green flashing screen for a while).Now I figured they might have fixed the issue with the KitKat update, but I get an error when the file is almost finished moving.
(The device has either stopped responding or is disconnected)Any idea on how to solve this issue? I am willing to try rooting again, since I really want to see HD movies on the tablet w/o cutting them into two pieces. We now have a KitKat-ready build of TWRP. Try this:Download this recovery file:and install the file with Odin. Use all Odin steps given above. Make sure to enable USB debugging first.When the recovery is flashed and the device boots up, download the latest SuperSU zip file:Copy the zip to your tab, then turn it off and boot into recovery mode using Volume up+Home+Power buttons.Tap the Install button and install the SuperSu zip. To verify root, try this app: Then reboot system.
This should work. Let me know!.